Bach 16 M leadpipe options
- jrod93
- Posts: 36
- Joined: Jun 21, 2018
Hello all
I’m looking at the possibility of switching out my lead pipe on my 1983 Bach 16M. So I’m looking into some suggestions from you guys. Originally I wanted a Kaunstal H8. But seeing that they don’t make that anymore…… What are the other options? I realize that I am going to have to replace the inner slide and possibly decide whether a pressure fit or receiver part.
Let me know what you think….
I’m looking at the possibility of switching out my lead pipe on my 1983 Bach 16M. So I’m looking into some suggestions from you guys. Originally I wanted a Kaunstal H8. But seeing that they don’t make that anymore…… What are the other options? I realize that I am going to have to replace the inner slide and possibly decide whether a pressure fit or receiver part.
Let me know what you think….
- Matt_K
- Posts: 4809
- Joined: Mar 21, 2018
Shires or Edwards are popular choices. The .001” won’t make much of a difference. The #2 for both is pretty standard. Brassark makes a 32H replica that can be made in that size. I have one on order myself, though it’s for a king 3B
- Burgerbob
- Posts: 6327
- Joined: Apr 23, 2018
[quote="Bach5G"]Will Shires and Edwards make a press fit?[/quote]
You'd just have your tech torch off the screw ring and put on an unthreaded one.
You'd just have your tech torch off the screw ring and put on an unthreaded one.
- Bach5G
- Posts: 2874
- Joined: Apr 07, 2018
[quote="Burgerbob"]<QUOTE author="Bach5G" post_id="163361" time="1637474190" user_id="2999">
Will Shires and Edwards make a press fit?[/quote]
You'd just have your tech torch off the screw ring and put on an unthreaded one.
</QUOTE>
Of course. But that wasn’t the question. The question was: Will Shires/Edwards make a press fit?
Will Shires and Edwards make a press fit?[/quote]
You'd just have your tech torch off the screw ring and put on an unthreaded one.
</QUOTE>
Of course. But that wasn’t the question. The question was: Will Shires/Edwards make a press fit?
- TheBoneRanger
- Posts: 225
- Joined: Apr 04, 2018
I had Shires send me a #1.5 and #2.5, without collars, for my early 16m (.509, no open gooseneck). I had my tech fit collars after they arrived.
You won’t need to replace the inner slide, unless yours gets destroyed pulling out the old pipe. The .001” is so small, it may as well not exist. My pipes are snug and play great.
Andrew
You won’t need to replace the inner slide, unless yours gets destroyed pulling out the old pipe. The .001” is so small, it may as well not exist. My pipes are snug and play great.
Andrew
- Vegasbound
- Posts: 1328
- Joined: Jul 06, 2019
The other popular option back in the day as well as changing the pipe was a 3b crook
- slidefunk
- Posts: 106
- Joined: Oct 19, 2020
[quote="Bach5G"]Of course. But that wasn’t the question. The question was: Will Shires/Edwards make a press fit?[/quote]
You know they have email address for these sorts of questions, right? These companies are staffed by real people who's job it is to answer inquiries like this.
You know they have email address for these sorts of questions, right? These companies are staffed by real people who's job it is to answer inquiries like this.
- Matt_K
- Posts: 4809
- Joined: Mar 21, 2018
That’s true, but there’s an implied question there that is seeking information about what is not known. Eg. “yes but they’ll tell you X weeks but it really might be Y weeks/months”. I don’t think it’s unreasonable to crowd source such a question even if an official source may have the same info. Especially since I’m this context it is more exploratory than what I would do because I’m very opinionated and specific about my preferences :lol:
- brassmedic
- Posts: 1447
- Joined: Dec 14, 2018
I can make .508/.509 pipes, and yes the .001 difference is negligible. I can pull the existing pipe for you too. That can almost always be done successfully without having to replace the slide tube. And if you just leave it as a press-fit you will make things a lot easier on yourself.