1.5g size flat rim mouthpiece suggestion
- aftercast
- Posts: 3
- Joined: Mar 29, 2022
Hi, I'm using denis wick heritage 0al on my edwards bass with dual bore slide. It works quite well but sometimes it feels way too much for lighter repertoire/music. I'm thinking on trying 1.5g size(27mm) mouthpiece. I'd like to try something that easy to play, has more punch(edge) in sound. I love 0al's rim contour but might be ok with wider rim. Any recommendations?
- BGuttman
- Posts: 7368
- Joined: Mar 22, 2018
If you like the Wick rim, try a 1AL. Still too big? Try a 2AL (or 2NAL, which seems to be pretty popular).
Other 1 1/2 G sizes? Of course the Bach or Faxx 1 1/2 G (duh). Marcinkiewicz 3 (old style) or 1 1/2 G (new style). Schilke 58. There are others, of course.
Other 1 1/2 G sizes? Of course the Bach or Faxx 1 1/2 G (duh). Marcinkiewicz 3 (old style) or 1 1/2 G (new style). Schilke 58. There are others, of course.
- Vegasbound
- Posts: 1328
- Joined: Jul 06, 2019
Doug Elliott
Also Mercer and Barker
Also Mercer and Barker
- aftercast
- Posts: 3
- Joined: Mar 29, 2022
[quote="BGuttman"]If you like the Wick rim, try a 1AL. Still too big? Try a 2AL (or 2NAL, which seems to be pretty popular).
Other 1 1/2 G sizes? Of course the Bach or Faxx 1 1/2 G (duh). Marcinkiewicz 3 (old style) or 1 1/2 G (new style). Schilke 58. There are others, of course.[/quote]
Wick 1al/2al is a great option but i'd like to try shallower cup.
How is Bach 1.5G's rim contour?
I'd played Bach 1.25g and 5g before but they are too round and felt uncomfortable for me.
Other 1 1/2 G sizes? Of course the Bach or Faxx 1 1/2 G (duh). Marcinkiewicz 3 (old style) or 1 1/2 G (new style). Schilke 58. There are others, of course.[/quote]
Wick 1al/2al is a great option but i'd like to try shallower cup.
How is Bach 1.5G's rim contour?
I'd played Bach 1.25g and 5g before but they are too round and felt uncomfortable for me.
- blast
- Posts: 671
- Joined: Mar 22, 2018
Rath B1.5W. A copy of my wide rim MV Bach. Does everything you ask.
- tbonesullivan
- Posts: 1959
- Joined: Jul 02, 2019
[quote="BGuttman"]If you like the Wick rim, try a 1AL. Still too big? Try a 2AL (or 2NAL, which seems to be pretty popular).[/quote] I would second this if you like the Wick Rim. The throat is a little smaller on those two pieces. The 1AL also has an OPEN backbore, while the 0AL and 2AL have a BARREL backbore. Still not sure what the difference is.
- Posaunus
- Posts: 5018
- Joined: Mar 23, 2018
[quote="tbonesullivan"]
The 1AL also has an OPEN backbore, while the 0AL and 2AL have a BARREL backbore. Still not sure what the difference is.[/quote]
Good question. I've never understood the difference between the various Denis Wick mouthpiece backbores ("Barrel", "V-Type", "Medium", "Open"). Can anyone elaborate about their physical characteristics - and the effect on how they play?
[Perhaps this could be a separate thread?]
The 1AL also has an OPEN backbore, while the 0AL and 2AL have a BARREL backbore. Still not sure what the difference is.[/quote]
Good question. I've never understood the difference between the various Denis Wick mouthpiece backbores ("Barrel", "V-Type", "Medium", "Open"). Can anyone elaborate about their physical characteristics - and the effect on how they play?
[Perhaps this could be a separate thread?]
- SquareTube
- Posts: 17
- Joined: Mar 10, 2022
I'm very fond of the Ferguson V. I wouldn't call it flat, but I don't think about it, so it must suit me. (Avoids the "falling into the cup" rim profile of the larger Fergusons.)
For me the 0AL seemed to have a long, narrow cup. As in deeper than the rim would match well. Felt quite sonically imbalanced. Add in the open throat and well,....so if you're looking for that blow, take this with a grain of salt.
For me the 0AL seemed to have a long, narrow cup. As in deeper than the rim would match well. Felt quite sonically imbalanced. Add in the open throat and well,....so if you're looking for that blow, take this with a grain of salt.
- hyperbolica
- Posts: 3990
- Joined: Mar 23, 2018
The Ferguson V might actually feel too small. It's on the bright side of 1.5g. It's a mouthpiece I use when I'm on the brink between bass and tenor. You might try the Ferguson L, which is a 1.25g size, but has more bite than other makes.
Also, the mouthpiece can only do so much. A slide that big might be what's making the sound so tubby. Dialing back to a 562 straight might help you get where you're trying to go.
Also, the mouthpiece can only do so much. A slide that big might be what's making the sound so tubby. Dialing back to a 562 straight might help you get where you're trying to go.
- harrisonreed
- Posts: 6479
- Joined: Aug 17, 2018
[quote="Posaunus"]<QUOTE author="tbonesullivan" post_id="182113" time="1656595114" user_id="7063">
The 1AL also has an OPEN backbore, while the 0AL and 2AL have a BARREL backbore. Still not sure what the difference is.[/quote]
Good question. I've never understood the difference between the various Denis Wick mouthpiece backbores ("Barrel", "V-Type", "Medium", "Open"). Can anyone elaborate about their physical characteristics - and the effect on how they play?
[Perhaps this could be a separate thread?]
</QUOTE>
Barrel means it's concave. Not that it is wider in the middle than at the end of the shank, but that the taper rate is curved, like half a barrel.
V means it is a straight line taper.
Open backbores have more total volume, usually because they move into a bore that is wider to begin with.
Medium is just a word that is used that doesn't mean anything.
The 1AL also has an OPEN backbore, while the 0AL and 2AL have a BARREL backbore. Still not sure what the difference is.[/quote]
Good question. I've never understood the difference between the various Denis Wick mouthpiece backbores ("Barrel", "V-Type", "Medium", "Open"). Can anyone elaborate about their physical characteristics - and the effect on how they play?
[Perhaps this could be a separate thread?]
</QUOTE>
Barrel means it's concave. Not that it is wider in the middle than at the end of the shank, but that the taper rate is curved, like half a barrel.
V means it is a straight line taper.
Open backbores have more total volume, usually because they move into a bore that is wider to begin with.
Medium is just a word that is used that doesn't mean anything.
- Posaunus
- Posts: 5018
- Joined: Mar 23, 2018
[quote="harrisonreed"]<QUOTE author="Posaunus" post_id="182118" time="1656598174" user_id="158">
I've never understood the difference between the various Denis Wick mouthpiece backbores ("Barrel", "V-Type", "Medium", "Open"). Can anyone elaborate about their physical characteristics - and the effect on how they play?
[Perhaps this could be a separate thread?][/quote]
Barrel means it's concave. Not that it is wider in the middle than at the end of the shank, but that the taper rate is curved, like half a barrel.
V means it is a straight line taper.
Open backbores have more total volume, usually because they move into a bore that is wider to begin with.
Medium is just a word that is used that doesn't mean anything.
</QUOTE>
Thanks Harrison.
How do all these affect how the mouthpieces play?
I've never understood the difference between the various Denis Wick mouthpiece backbores ("Barrel", "V-Type", "Medium", "Open"). Can anyone elaborate about their physical characteristics - and the effect on how they play?
[Perhaps this could be a separate thread?][/quote]
Barrel means it's concave. Not that it is wider in the middle than at the end of the shank, but that the taper rate is curved, like half a barrel.
V means it is a straight line taper.
Open backbores have more total volume, usually because they move into a bore that is wider to begin with.
Medium is just a word that is used that doesn't mean anything.
</QUOTE>
Thanks Harrison.
How do all these affect how the mouthpieces play?
- harrisonreed
- Posts: 6479
- Joined: Aug 17, 2018
[quote="Posaunus"]<QUOTE author="harrisonreed" post_id="185328" time="1659707511" user_id="3642">
Barrel means it's concave. Not that it is wider in the middle than at the end of the shank, but that the taper rate is curved, like half a barrel.
V means it is a straight line taper.
Open backbores have more total volume, usually because they move into a bore that is wider to begin with.
Medium is just a word that is used that doesn't mean anything.[/quote]
Thanks Harrison.
How do all these affect how the mouthpieces play?
</QUOTE>
I don't want to give bad info. I used these resources and prototyping when I designed my current mouthpiece, and the vast majority of my piece is lifted from existing mouthpieces:
<LINK_TEXT text="https://everythingtrumpet.com/gearhead/ ... _size.html">https://everythingtrumpet.com/gearhead/Mouthpiece_throat_size.html</LINK_TEXT>
https://www.grmouthpieces.com/category-s/242.htm
Barrel means it's concave. Not that it is wider in the middle than at the end of the shank, but that the taper rate is curved, like half a barrel.
V means it is a straight line taper.
Open backbores have more total volume, usually because they move into a bore that is wider to begin with.
Medium is just a word that is used that doesn't mean anything.[/quote]
Thanks Harrison.
How do all these affect how the mouthpieces play?
</QUOTE>
I don't want to give bad info. I used these resources and prototyping when I designed my current mouthpiece, and the vast majority of my piece is lifted from existing mouthpieces:
<LINK_TEXT text="https://everythingtrumpet.com/gearhead/ ... _size.html">https://everythingtrumpet.com/gearhead/Mouthpiece_throat_size.html</LINK_TEXT>
https://www.grmouthpieces.com/category-s/242.htm