SOLD $4500 Edwards-Greenhoe Bass Trombone
- ronchristiansen
- Posts: 12
- Joined: May 02, 2019
Beautiful Greenhoe/Edwards Bass Trombone
This horn will win a job.
$4,500 Buyer pays shipping and insurance.
These are original Greenhoe valves set up on an Edwards Bass
- Independent Greenhoe Valves
- Edwards 9.5" Red Brass Bell with Brushed Satin Finish (23 Gauge) 1309CF
- Edwards Single Bore Slide (.562 Bore)
Information:
Dana Hofer built this solution to allow the bell to fit either Greenhoe valves or Edwards.
The Edwards slide is 9/10 but has some normal lacquer wear. The valve section was set up for Edwards by Dana Hofer in Chicago - see pictures. Dana Hofer serviced the horn in June 2022. The horn comes with two standard Greenhoe valve caps and a single Lexan cap (pictured). Propac Bass Trombone Case Included.
Pictures are available at this link:[url]<LINK_TEXT text="https://drive.google.com/drive/folders/ ... sp=sharing">https://drive.google.com/drive/folders/12FOhlHNqV9hBnDSWhVJewbWJsd6eFwx2?usp=sharing</LINK_TEXT>
This horn will win a job.
$4,500 Buyer pays shipping and insurance.
These are original Greenhoe valves set up on an Edwards Bass
- Independent Greenhoe Valves
- Edwards 9.5" Red Brass Bell with Brushed Satin Finish (23 Gauge) 1309CF
- Edwards Single Bore Slide (.562 Bore)
Information:
Dana Hofer built this solution to allow the bell to fit either Greenhoe valves or Edwards.
The Edwards slide is 9/10 but has some normal lacquer wear. The valve section was set up for Edwards by Dana Hofer in Chicago - see pictures. Dana Hofer serviced the horn in June 2022. The horn comes with two standard Greenhoe valve caps and a single Lexan cap (pictured). Propac Bass Trombone Case Included.
Pictures are available at this link:
- Burgerbob
- Posts: 6327
- Joined: Apr 23, 2018
[quote="tomato"]it look like the valve are not line up ? explain thank you[/quote]
The front bell brace was adjusted to fit Edwards.
The front bell brace was adjusted to fit Edwards.
- ronchristiansen
- Posts: 12
- Joined: May 02, 2019
Hi! Yes, the desire was to allow the bell to fit either the Greenhoe valves or Edwards. So, Dana Hofer built this solution to allow an Edwards Bell to not be locked into the valves.
- ronchristiansen
- Posts: 12
- Joined: May 02, 2019
Bump
- ronchristiansen
- Posts: 12
- Joined: May 02, 2019
Bump
- ronchristiansen
- Posts: 12
- Joined: May 02, 2019
bump
- CP91
- Posts: 19
- Joined: May 18, 2021
Hi Ron, I realize you are selling the entire horn but I will buy the slide from you if you’re willing to do that.