Replacement slide crook

Login to Reply
S
Sailor22
Posts: 7
Joined: Nov 16, 2022

by Sailor22 »

Where can I find a replacement slide crook for a CONN 50H? I have found large and small bore but not the .522 medium bore.

Any suggestions?
B
Bonearzt
Posts: 833
Joined: Mar 22, 2018

by Bonearzt »

check with MK Drawing
M
Matt_K
Posts: 4809
Joined: Mar 21, 2018

by Matt_K »

2nd MK drawing. Some of their crooks aren’t found very easily but you can order by searching google weirdly enough. I had a .515 one installed on a dual bore recently from them that is excellent. Note that the crook is typically a touch larger than the inner slide bore (closer to the ID of the outer slide iirc?)
C
CEDivine
Posts: 9
Joined: Nov 12, 2022

by CEDivine »

You will probably want a crook in the .540" range. Do you know your outer diameter of the crook? M/K makes generic medium bore crooks in .540" and .545" bore sizes. Check page 1 and 5.

<LINK_TEXT text="https://www.mkdrawing.com/product-categ ... /trombone/">https://www.mkdrawing.com/product-category/all-inventory/repair-parts/trombone/</LINK_TEXT>
S
Sailor22
Posts: 7
Joined: Nov 16, 2022

by Sailor22 »

Thanks. I'll check them out.
S
Sailor22
Posts: 7
Joined: Nov 16, 2022

by Sailor22 » (edited 2022-11-17 11:06 a.m.)

[quote="Bonearzt"]check with MK Drawing[/quote]
Thank you. I found one at MK that will work with 540" bore but with my luck, out of stock.
B
Bonearzt
Posts: 833
Joined: Mar 22, 2018

by Bonearzt »

[quote="Sailor22"]<QUOTE author="Bonearzt" post_id="193761" time="1668633906" user_id="54">
check with MK Drawing[/quote]
Thank you. I found one at MK that will work with 540" bore but with my luck, out of stock.
</QUOTE>

I'll bet if you ask nicely, they could crank one out fairly quickly.
C
CEDivine
Posts: 9
Joined: Nov 12, 2022

by CEDivine »

[quote="Bonearzt"]<QUOTE author="Sailor22" post_id="193804" time="1668701104" user_id="15934">

Thank you. I found one at MK that will work with 540" bore but with my luck, out of stock.[/quote]

I'll bet if you ask nicely, they could crank one out fairly quickly.
</QUOTE>

I'm asking them nicely today to crank me out some rose 42 slide tubes and a bronze crook....
S
Sailor22
Posts: 7
Joined: Nov 16, 2022

by Sailor22 »

[quote="CEDivine"]<QUOTE author="Bonearzt" post_id="193807" time="1668704476" user_id="54">

I'll bet if you ask nicely, they could crank one out fairly quickly.[/quote]

I'm asking them nicely today to crank me out some rose 42 slide tubes and a bronze crook....
</QUOTE>

Thanks! I will do that.