WoodWindDesign Tenor Stand Issue
- MagnumH
- Posts: 209
- Joined: Mar 06, 2020
Hey guys! I use the otherwise-excellent WoodWindDesign trombone stand but there's one small recurring issue I'm noticing. The top disc - not the rubber o-rings, but the felt-lined disc the horn actually rests on - constantly shifts to the top of the stand when I take the horn off. It doesn't stick in place. It's easy enough to slide back down before setting my horn down again, but it's a constant niggle.
I tried moving a rubber o-ring to above it, but that then got in the way of the fit inside the bell, and didn't leave me with enough grip lower down so the stand collapsed during use.
The felt is also starting to wear and tear after about 15 months usage.
Anyone else experience something similar? Suggested fixes?
I tried moving a rubber o-ring to above it, but that then got in the way of the fit inside the bell, and didn't leave me with enough grip lower down so the stand collapsed during use.
The felt is also starting to wear and tear after about 15 months usage.
Anyone else experience something similar? Suggested fixes?
- KWL
- Posts: 123
- Joined: Oct 23, 2019
I’ve had a similar problem with my bass stand that has two felt rings. A sock over the tip of the stand solved the moving issue and absorbs moisture as a bonus. The sock does add one more thing to carry around in the case.
Ken
Ken
- muschem
- Posts: 372
- Joined: Jan 17, 2021
The disc on my tenor stand is very tight. It doesn't budge. The one on my bass stand moves more freely. For both of them, I use a Hamilton bone sock over the top, which seems to help with the felt wear. I put a black elastic hair tie over the bone sock, right above the disc. This keeps the bone sock from wanting to pull up off the top of the stand, and also keeps the disc from shifting. If you don't like the sock, you could probably just use the hair tie above the disc.
- Doug_Elliott
- Posts: 4155
- Joined: Mar 22, 2018
I would contact the guy who makes them and see if you can get a replacement.
I have one of those stands but I only used it a couple of times. I mostly use an Aida.
I have one of those stands but I only used it a couple of times. I mostly use an Aida.
- sf105
- Posts: 433
- Joined: Mar 24, 2018
Similarly, I use a cloth over it which also protects the bell when it's in the case.
- ssking2b
- Posts: 487
- Joined: Sep 29, 2018
I put another O ring on top of the plastic piece to hold it in place. Works like a charm. I also drape a Seagrams Whiskey bag over the top to catch moisture on both my tenor and bass WWD stands. No issues at all.
- baileyman
- Posts: 1169
- Joined: Mar 24, 2018
It would seem the upper disk is narrow enough to rise far enough into the nearly straight section of the bell that the slight taper then grabs it. Just like a leadpipe grabs a mouthpiece shank. I think I would try to increase the disk diameter with some more fabric. Maybe try the sock idea for proof of concept. Maybe two sock layers.