Refurbished/restored trombones

B
BBB
Posts: 10
Joined: May 04, 2024

by BBB »

I was always warned off refurbished/relaquered trombones as it can alter the tonal characteristics of the instrument. Has this process improved in recent years.

I’m currently looking at a couple of 2Bs on eBay which state they’ve been totally relaquered/silvered and refurbished. They’re vintage instruments and I don’t have chance to try before I buy.

Any ideas or advice from experience with refurbished instruments?

Thanks
B
braymond21
Posts: 265
Joined: Mar 18, 2019

by braymond21 »

The issue is mainly that you have to buff the instrument quite a lot to get it ready for refinishing, which removes a bit of material. And redoing a finish is a more intensive process that can really hurt how the horn plays if done incorrectly. If it's done well, the instrument will play a little differently, but still be great, and the people that can do that kind of top notch work aren't too common. If the horns you're looking at have been done by someone who knows what they're doing, then it's fine, but if it's just some guy who thought they could grab a spray can and go at it, avoid it.
B
BBB
Posts: 10
Joined: May 04, 2024

by BBB »

They are refurbished by The H N White Company of Cleveland Ohio.

(Not sure if I’m allowed to say that?
H
harrisonreed
Posts: 6479
Joined: Aug 17, 2018

by harrisonreed »

That company does good looking finishes on the silver instruments, and normal brass lacquer instruments. They look like museum pieces. The crazy colored ones though ...
R
Reedman1
Posts: 310
Joined: Apr 14, 2018

by Reedman1 »

[quote="BBB"]They are refurbished by The H N White Company of Cleveland Ohio.

(Not sure if I’m allowed to say that?[/quote]

I bought a beautiful King Master cornet from them for quite a healthy price tag, some years ago. It’s a good playing horn, but the shiny silver finish started coming off with the first polish.
B
Bach5G
Posts: 2874
Joined: Apr 07, 2018

by Bach5G »

[quote="BBB"]They are refurbished by The H N White Company of Cleveland Ohio.

(Not sure if I’m allowed to say that?[/quote]

Same HN White Co.?
H
hyperbolica
Posts: 3990
Joined: Mar 23, 2018

by hyperbolica » (edited 2024-05-05 7:16 p.m.)

I usually prefer old ugly horns for this reason. But I have a refinished 32h that plays well. It has been heavily buffed and the slide has been widened. I don't have any info on the source of the refinish. It's still a great playing horn. Refinishing and mods do change instruments, but it might be unfair to just say off hand that they automatically become worse. It's a nice player.

If you're addicted to pretty finishes, you wind up taking risks on refinishing and mods. If you don't mind a little ugly, it's easier to find a better player.
B
brassmedic
Posts: 1447
Joined: Dec 14, 2018

by brassmedic »

[quote="Reedman1"]<QUOTE author="BBB" post_id="242152" time="1714850541" user_id="18014">
They are refurbished by The H N White Company of Cleveland Ohio.

(Not sure if I’m allowed to say that?[/quote]

I bought a beautiful King Master cornet from them for quite a healthy price tag, some years ago. It’s a good playing horn, but the shiny silver finish started coming off with the first polish.
</QUOTE>

What do you mean? Do you mean the silver plating flaked off when you polished it the first time? If that's the case, then they obviously didn't prep it correctly or had a very serious problem with the plating process. I hope you returned it for a refund.
B
brassmedic
Posts: 1447
Joined: Dec 14, 2018

by brassmedic »

[quote="BBB"]I was always warned off refurbished/relaquered trombones as it can alter the tonal characteristics of the instrument. Has this process improved in recent years.

I’m currently looking at a couple of 2Bs on eBay which state they’ve been totally relaquered/silvered and refurbished. They’re vintage instruments and I don’t have chance to try before I buy.

Any ideas or advice from experience with refurbished instruments?

Thanks[/quote]
It's still the same process. They haven't improved on the buffing wheel. There's nothing to improve because it works very well. I have seen a couple horns that were so thin they didn't play well (they were early Bachs), but normally who's to say it won't play even better after buffing? Some people think that buffing a bell will ruin it 100% of the time, and I totally disagree. Especially vintage King bells which are pretty thick to start out with. But I haven't seen any of these HN White restorations in person, so I can't speak specifically to that.
B
BGuttman
Posts: 7368
Joined: Mar 22, 2018

by BGuttman »

Note that H.N. White Company is not King Musical Instruments. H.N. White is a group of White's descendants who maintain a Web site with King history and have a museum of restored instruments.

I have no idea how good the restorations are, but they are certainly asking top dollar for them.
C
CharlieB
Posts: 434
Joined: Mar 29, 2018

by CharlieB »

Welcome, and Hello from us to Norway !

Given your location, I guess you want to get this right the first time.

There are no guarantees when you buy on ebay.

Ya puts in yer nickel and ya takes yer chances.

Below is a link the H.N. White Company Store:

They have 2B's for sale.

https://www.hnwhite.com/store

Note their customer approval trial policy on horns sold by them.

That shows their dedication to selling a good product.

Another option.....( I see that you're new here.)

This site has an extensive "Classifieds" section where there are some 2B's listed.

Unlike with ebay, you get to talk with the seller, who is usually a trombonist.
H
harrisonreed
Posts: 6479
Joined: Aug 17, 2018

by harrisonreed »

[quote="brassmedic"]It's still the same process. They haven't improved on the buffing wheel. There's nothing to improve because it works very well. I have seen a couple horns that were so thin they didn't play well (they were early Bachs), but normally who's to say it won't play even better after buffing? Some people think that buffing a bell will ruin it 100% of the time, and I totally disagree. Especially vintage King bells which are pretty thick to start out with. But I haven't seen any of these HN White restorations in person, so I can't speak specifically to that.[/quote]

To this point <EMOJI seq="2b06" tseq="2b06">⬆️</EMOJI>, I recently got my vintage 3BF Silversonic back from Scott Sweeney. I sent it out to get the slide inners replaced and the King lacquer removed. Came back looking completely overhauled, with a nice brushed satin finish on the bell. He even saved the original leadpipe (which was one piece) and made it press fit.

The work was easily the best thing that could have been done for that horn -- the bell feels alive now and the response is better than before. It was already a great horn but yeah, buffing the entire bell section and slide outers really made the horn sing. Gave an old horn a new lease on life.
J
jonathanharker
Posts: 139
Joined: Aug 14, 2022

by jonathanharker »

[quote="BBB"]I was always warned off refurbished/relaquered trombones as it can alter the tonal characteristics of the instrument. Has this process improved in recent years.[/quote]

I wouldn't put much stock in that opinion, to be honest (unless it was a really bad job, or it was run over by a tractor). There might be perceptible differences to you as the player in sound or response or how you feel playing it, but rest assured, out front I'd wager you'd be hard-pressed to tell the difference from behind a screen.
B
Bonearzt
Posts: 833
Joined: Mar 22, 2018

by Bonearzt »

[quote="jonathanharker"]<QUOTE author="BBB" post_id="242128" time="1714838238" user_id="18014">
I was always warned off refurbished/relaquered trombones as it can alter the tonal characteristics of the instrument. Has this process improved in recent years.[/quote]I wouldn't put much stock in that opinion, to be honest (unless it was a really bad job, or it was run over by a tractor). There might be perceptible differences to you as the player in sound or response or how you feel playing it, but rest assured, out front I'd wager you'd be hard-pressed to tell the difference from behind a screen.
</QUOTE>

TOTALLY agree!!

Unless you played the horns extensively BEFORE the restoration, you have no way to know how it actually played/sounded!!

Sometimes a careful rebuild WILL help a horn play better, built up stress & tension are definitely sound/response killers!!!

I would be hard pressed to buy a horn without the chance to play it first! Even several horns of the same model will play slightly differently.
R
Reedman1
Posts: 310
Joined: Apr 14, 2018

by Reedman1 »

[quote="brassmedic"]<QUOTE author="Reedman1" post_id="242205" time="1714929560" user_id="3067">

I bought a beautiful King Master cornet from them for quite a healthy price tag, some years ago. It’s a good playing horn, but the shiny silver finish started coming off with the first polish.[/quote]

What do you mean? Do you mean the silver plating flaked off when you polished it the first time? If that's the case, then they obviously didn't prep it correctly or had a very serious problem with the plating process. I hope you returned it for a refund.
</QUOTE>

Yes, the silver plating wiped off with the first polish. I really should have returned the horn, but they weren’t particularly easy to deal with, so I punted. The horn still plays great, so not a total loss; but for what I wound up getting, I should have paid much less.
B
bassclef
Posts: 337
Joined: Mar 23, 2018

by bassclef »

[quote="Bach5G"]<QUOTE author="BBB" post_id="242152" time="1714850541" user_id="18014">
They are refurbished by The H N White Company of Cleveland Ohio.

(Not sure if I’m allowed to say that?[/quote]

Same HN White Co.?
</QUOTE>
No, I don't think it is despite what you might read on the website. If I'm not mistaken, I believe those are done, and then sold, by a shop called Beeman Brass Works. They are known for outstanding restoration work and people send their horns (mostly tubas, it seems) from all over the country for them to work their magic.
C
Crazy4Tbone86
Posts: 1654
Joined: Jan 14, 2020

by Crazy4Tbone86 »

[quote="Reedman1"]<QUOTE author="brassmedic" post_id="242213" time="1714939755" user_id="4102">

What do you mean? Do you mean the silver plating flaked off when you polished it the first time? If that's the case, then they obviously didn't prep it correctly or had a very serious problem with the plating process. I hope you returned it for a refund.[/quote]

Yes, the silver plating wiped off with the first polish. I really should have returned the horn, but they weren’t particularly easy to deal with, so I punted. The horn still plays great, so not a total loss; but for what I wound up getting, I should have paid much less.
</QUOTE>

I have heard similar stories about a well-known Music Store/Custom Shop back in the 1970s. They are out of business now, so I will keep the store name anonymous. The silver plating was so thin that it wiped off after a couple of wipe-downs with a polishing cloth. It happens…….especially if the shop folks are not well versed in silver plating preparation and application.
B
brassmedic
Posts: 1447
Joined: Dec 14, 2018

by brassmedic »

[quote="Reedman1"]<QUOTE author="brassmedic" post_id="242213" time="1714939755" user_id="4102">

What do you mean? Do you mean the silver plating flaked off when you polished it the first time? If that's the case, then they obviously didn't prep it correctly or had a very serious problem with the plating process. I hope you returned it for a refund.[/quote]

Yes, the silver plating wiped off with the first polish. I really should have returned the horn, but they weren’t particularly easy to deal with, so I punted. The horn still plays great, so not a total loss; but for what I wound up getting, I should have paid much less.
</QUOTE>

What did you polish it with?
R
Reedman1
Posts: 310
Joined: Apr 14, 2018

by Reedman1 »

[quote="brassmedic"]<QUOTE author="Reedman1" post_id="242634" time="1715361379" user_id="3067">

Yes, the silver plating wiped off with the first polish. I really should have returned the horn, but they weren’t particularly easy to deal with, so I punted. The horn still plays great, so not a total loss; but for what I wound up getting, I should have paid much less.[/quote]

What did you polish it with?
</QUOTE>

A polishing clog for silver-plated brass instruments. Don’t remember what brand, but I got it from my repairman, who was highly ethical and very careful with instruments.