Schmelzer basses? Thoughts?
- dukesboneman
- Posts: 935
- Joined: Apr 02, 2018
Point the microphone right at the speaker, you`ll get plenty of feedback.
- MStarke
- Posts: 1031
- Joined: Jan 01, 2019
I have never seen a Schmelzer in real life hear in Germany, but have often been tempted to give them a try. however there is something that always kept me from doing that.
You might contact Nick Sholl on Facebook, I think he might have tried them at some point!
You might contact Nick Sholl on Facebook, I think he might have tried them at some point!
- Jbeckett
- Posts: 1194
- Joined: Mar 25, 2018
[quote="MStarke"]I have never seen a Schmelzer in real life hear in Germany, but have often been tempted to give them a try. however there is something that always kept me from doing that.
You might contact Nick Sholl on Facebook, I think he might have tried them at some point![/quote]
Thank you
You might contact Nick Sholl on Facebook, I think he might have tried them at some point![/quote]
Thank you
- Jbeckett
- Posts: 1194
- Joined: Mar 25, 2018
[quote="dukesboneman"]Point the microphone right at the speaker, you`ll get plenty of feedback.[/quote]
NICE!
Definitely looking for some thoughts regarding the instrument
NICE!
Definitely looking for some thoughts regarding the instrument
- WGWTR180
- Posts: 2152
- Joined: Sep 04, 2019
[quote="Jbeckett"]Looking for some feedback.[/quote]
You probably know that Horn Guys sells them. I too have wondered what they are like(not wanting to purchase). They are at an interesting price point compared to other "boutique" makers out there so it makes me wonder what the overall quality is.
You probably know that Horn Guys sells them. I too have wondered what they are like(not wanting to purchase). They are at an interesting price point compared to other "boutique" makers out there so it makes me wonder what the overall quality is.
- bassbone1993
- Posts: 435
- Joined: Feb 10, 2023
I'd be very curious as well. They're small bores seem to be well regarded
- Jbeckett
- Posts: 1194
- Joined: Mar 25, 2018
Nick Sholl has some videos on the YouTube’s, but it’s not necessarily me, playing on my mouthpiece, and I prefer a gold brass bell when playing solo rep.
I had seen the one at HornGuys and emailed Eric about it. Curious if it mates up with an Edwards or Shires or if lead pipes are usable from other instruments.
European players seem to dig them at a high level on the Scmelzer site.
I had seen the one at HornGuys and emailed Eric about it. Curious if it mates up with an Edwards or Shires or if lead pipes are usable from other instruments.
European players seem to dig them at a high level on the Scmelzer site.
- MStarke
- Posts: 1031
- Joined: Jan 01, 2019
[quote="Jbeckett"]Nick Sholl has some videos on the YouTube’s, but it’s not necessarily me, playing on my mouthpiece, and I prefer a gold brass bell when playing solo rep.
I had seen the one at HornGuys and emailed Eric about it. Curious if it mates up with an Edwards or Shires or if lead pipes are usable from other instruments.
European players seem to dig them at a high level on the Scmelzer site.[/quote]
Nick is a really nice guy, I am pretty sure he would share some more thoughts when you contact him directly.
Reg popularity - as said I have never seen one in real life, but yes, they seem to be played quite a bit. I am not sure which parts he actually makes himself and where the others are sourced. I have heard people say some parts are made in China, but that's not necessarily true and not necessarily bad IF it is true.
I had seen the one at HornGuys and emailed Eric about it. Curious if it mates up with an Edwards or Shires or if lead pipes are usable from other instruments.
European players seem to dig them at a high level on the Scmelzer site.[/quote]
Nick is a really nice guy, I am pretty sure he would share some more thoughts when you contact him directly.
Reg popularity - as said I have never seen one in real life, but yes, they seem to be played quite a bit. I am not sure which parts he actually makes himself and where the others are sourced. I have heard people say some parts are made in China, but that's not necessarily true and not necessarily bad IF it is true.
- pedrombon
- Posts: 417
- Joined: Apr 11, 2018
[quote="MStarke"]
Reg popularity - as said I have never seen one in real life, but yes, they seem to be played quite a bit. I am not sure which parts he actually makes himself and where the others are sourced. I have heard people say some parts are made in China, but that's not necessarily true and not necessarily bad IF it is true.[/quote]
I have also heard that they are manufactured and assembled in China.
Reg popularity - as said I have never seen one in real life, but yes, they seem to be played quite a bit. I am not sure which parts he actually makes himself and where the others are sourced. I have heard people say some parts are made in China, but that's not necessarily true and not necessarily bad IF it is true.[/quote]
I have also heard that they are manufactured and assembled in China.
- tkelley216
- Posts: 38
- Joined: Oct 25, 2021
Not many were made. I know someone who plays one professionally.
As far as sound and feel, they are similar to other the Schmelzer models that have been discussed on this forum; lightweight, very warm but centered sound, and can be pushed without breaking up. It's not exactly the sound concept you want to bring to an audition for a bigger American orchestra, but the guy I knew played it regularly in big bands, recording sessions, pit orchestras, and sometimes regional orchestras when they called.
Consistency seems to be an issue among all Schmelzers. You may have to try a room full of them to find "the one" and even "the one" may have a quirk or two you have to figure out, but once you adjust to the horn they can be hard to beat.
As far as sound and feel, they are similar to other the Schmelzer models that have been discussed on this forum; lightweight, very warm but centered sound, and can be pushed without breaking up. It's not exactly the sound concept you want to bring to an audition for a bigger American orchestra, but the guy I knew played it regularly in big bands, recording sessions, pit orchestras, and sometimes regional orchestras when they called.
Consistency seems to be an issue among all Schmelzers. You may have to try a room full of them to find "the one" and even "the one" may have a quirk or two you have to figure out, but once you adjust to the horn they can be hard to beat.
- Jbeckett
- Posts: 1194
- Joined: Mar 25, 2018
[quote="tkelley216"]Not many were made. I know someone who plays one professionally.
As far as sound and feel, they are similar to other the Schmelzer models that have been discussed on this forum; lightweight, very warm but centered sound, and can be pushed without breaking up. It's not exactly the sound concept you want to bring to an audition for a bigger American orchestra, but the guy I knew played it regularly in big bands, recording sessions, pit orchestras, and sometimes regional orchestras when they called.
Consistency seems to be an issue among all Schmelzers. You may have to try a room full of them to find "the one" and even "the one" may have a quirk or two you have to figure out, but once you adjust to the horn they can be hard to beat.[/quote]
Thank you
As far as sound and feel, they are similar to other the Schmelzer models that have been discussed on this forum; lightweight, very warm but centered sound, and can be pushed without breaking up. It's not exactly the sound concept you want to bring to an audition for a bigger American orchestra, but the guy I knew played it regularly in big bands, recording sessions, pit orchestras, and sometimes regional orchestras when they called.
Consistency seems to be an issue among all Schmelzers. You may have to try a room full of them to find "the one" and even "the one" may have a quirk or two you have to figure out, but once you adjust to the horn they can be hard to beat.[/quote]
Thank you
- Jbeckett
- Posts: 1194
- Joined: Mar 25, 2018
So Nick did private message me back on face space. He basically said that they’re good but not the quality of a Shires or Edwards. I guess I’ll end up buying a rotor section from Shires, to mount my existing set ups. Thanks for all the input
- MStarke
- Posts: 1031
- Joined: Jan 01, 2019
Thanks for sharing, that fits to what I have heard in the past.