Plunger size
- mickael57280
- Posts: 140
- Joined: Apr 25, 2018
Hi, I read in the Al Grey Plunger method that he recommand a plunger that let see 2 inch of the inside of the bell, but is it 2 inch on both sides ?
If so the plunger must be very small like 4 inch.
If so the plunger must be very small like 4 inch.
- BGuttman
- Posts: 7368
- Joined: Mar 22, 2018
Most of us use a 6 inch (150 mm) toilet plunger on trombone. This works up to an 8 1/2 inch (210 mm) bell.
I managed to find a 7 inch (175 mm) plunger to use on my bass trombone, but I'd rather have an 8 inch (200 mm).
The Harmon Triple Play cup part is around 6 inches. The H&B Tuxedo plunger is larger I don't use the H&B because the loop doesn't fit my hand comfortably.
I managed to find a 7 inch (175 mm) plunger to use on my bass trombone, but I'd rather have an 8 inch (200 mm).
The Harmon Triple Play cup part is around 6 inches. The H&B Tuxedo plunger is larger I don't use the H&B because the loop doesn't fit my hand comfortably.
- DDoghouse
- Posts: 64
- Joined: Mar 24, 2018
I've used a pint beer glass on occasion when I've been caught short.
- jthomas105
- Posts: 148
- Joined: Apr 08, 2018
Check out this link. It looks like the standard toilet size plunger.
<YOUTUBE id="_q5UWc_JdSY">https://www.youtube.com/watch?v=_q5UWc_JdSY</YOUTUBE>
<YOUTUBE id="_q5UWc_JdSY">https://www.youtube.com/watch?v=_q5UWc_JdSY</YOUTUBE>
- mickael57280
- Posts: 140
- Joined: Apr 25, 2018
Thank you, I have buy a standard 6 inch plunger, do you have solution for makin' it good lookin' round ?
- BGuttman
- Posts: 7368
- Joined: Mar 22, 2018
[quote="mickael57280"]Thank you, I have buy a standard 6 inch plunger, do you have solution for makin' it good lookin' round ?[/quote]
Did you buy the older style one or the newer one with the rubber extension? The older style is what we normally use. Remember, you don't need the stick! :good:
There are a few mods that are commonly done:
1. Drill out the place where the stick screws in. You can then insert a coin so you can adjust the amount of sound that comes out when closed.
2. Cut away the material on the inside to make the outer edge thinner.
3. Sam Burtis used to file a couple of dents into the post that held the stick to make it easier to hold between your fingers.
If you want it to be a different color, some paints can work. Problem is, most will flake off pretty readily. If you look around sometimes you can find an odd color at one of those cheap goods stores (Dollar Store).
Did you buy the older style one or the newer one with the rubber extension? The older style is what we normally use. Remember, you don't need the stick! :good:
There are a few mods that are commonly done:
1. Drill out the place where the stick screws in. You can then insert a coin so you can adjust the amount of sound that comes out when closed.
2. Cut away the material on the inside to make the outer edge thinner.
3. Sam Burtis used to file a couple of dents into the post that held the stick to make it easier to hold between your fingers.
If you want it to be a different color, some paints can work. Problem is, most will flake off pretty readily. If you look around sometimes you can find an odd color at one of those cheap goods stores (Dollar Store).
- mickael57280
- Posts: 140
- Joined: Apr 25, 2018
I have the older style one.