i don’t like springs
- Elow
- Posts: 1924
- Joined: Mar 02, 2020
So, i took apart a newish bach 42 for a ultrasonic cleaning and i took apart the rotor and everything and i don’t know if the trigger is safe for our chemicals so i took it off. I thought no biggie. I have been trying for 30 minutes to put the stupid trigger back on. My fingers have so many cuts and my thumb is numb. This can’t be the right way. The main problem i’m having is the spring coming and stabbing it’s way into my lovely thumb. Please someone help me
- harrisonreed
- Posts: 6479
- Joined: Aug 17, 2018
Yeah, there should be a tool or jig to wind and hold the spring in place under tension while you attach everything, at least that's how I've done it in gun smithing. Granted, an AKM trigger spring will take your finger off, rather than just cut it, but it's the same concept.
- PSJ
- Posts: 30
- Joined: Mar 29, 2018
This may not help now, but one of our local techs leaves all the extra on when he replaces the springs and puts little loops on the ends like on some of the euro tubas so he doesn't have happen what is happening to you. I have had to replace a couple on my own horns because the ends were cut to fit and it was easier to put on new then kill the thumbs.
- ithinknot
- Posts: 1339
- Joined: Jul 24, 2020
Deepest sympathies to you and your lovely thumb in this trying time. Anything involving springs with extended Pointy Bits (waterkeys being the classic) really needs a simple tool (rod/rods with hole drilled into it bore-wise) or at least smooth-jawed pliers. Nitrile coated work gloves if things are getting really desperate.
- harrisonreed
- Posts: 6479
- Joined: Aug 17, 2018
[quote="Elow"]So, i took apart a newish bach 42 for a ultrasonic cleaning and i took apart the rotor and everything and i don’t know if the trigger is safe for our chemicals so i took it off. I thought no biggie. I have been trying for 30 minutes to put the stupid trigger back on. My fingers have so many cuts and my thumb is numb. <U>This can’t be the right way.</U> The main problem i’m having is the spring coming and stabbing it’s way into my lovely thumb. <U>Please someone help me</U>[/quote]
Don't take this the wrong way, as I'm sure the shop you work at is full of great people who are cool to be around. Springs should be pretty easy with the correct tool and know-how. Every time you post something like this I sort of get angry at the "professionals" at your shop who should be teaching you the right way to do things. Are they just standing back and laughing at you, or are they going "yeah, we don't like springs either. Usually we just put the whole thing in the tank and press the button, then take it out after a minute". Either way, they aren't doing you any favors.
You seem really motivated with instrument repair and mods. I think you could find a better spot to get mentored, and maybe do a summer apprenticeship or something.
Don't take this the wrong way, as I'm sure the shop you work at is full of great people who are cool to be around. Springs should be pretty easy with the correct tool and know-how. Every time you post something like this I sort of get angry at the "professionals" at your shop who should be teaching you the right way to do things. Are they just standing back and laughing at you, or are they going "yeah, we don't like springs either. Usually we just put the whole thing in the tank and press the button, then take it out after a minute". Either way, they aren't doing you any favors.
You seem really motivated with instrument repair and mods. I think you could find a better spot to get mentored, and maybe do a summer apprenticeship or something.
- elmsandr
- Posts: 1373
- Joined: Mar 23, 2018
Put a coffee straw over the end of the spring. Or the rubber tip from a bottle of rotor/key oil with the needle applicators.
Cheers,
Andy
Cheers,
Andy
- Doug_Elliott
- Posts: 4155
- Joined: Mar 22, 2018
Get a short piece of very small diameter copper tubing at an auto supply place. Use that to maneuver the short spring wire into place.
The "professionals" in your shop probably don't know any more than you do.
The "professionals" in your shop probably don't know any more than you do.
- Elow
- Posts: 1924
- Joined: Mar 02, 2020
[quote="harrisonreed"]
Don't take this the wrong way, as I'm sure the shop you work at is full of great people who are cool to be around. Springs should be pretty easy with the correct tool and know-how. Every time you post something like this I sort of get angry at the "professionals" at your shop who should be teaching you the right way to do things. Are they just standing back and laughing at you, or are they going "yeah, we don't like springs either. Usually we just put the whole thing in the tank and press the button, then take it out after a minute". Either way, they aren't doing you any favors.
You seem really motivated with instrument repair and mods. I think you could find a better spot to get mentored, and maybe do a summer apprenticeship or something.[/quote]
The tech that used to teach me is still recovering from surgery so i dont really have anyone to learn from except 2 woodwind guys that arent too cool. My desk is in a different room from everyone else and all the equipment so no one really sees what i do unless i bring it in there and ask for help, but they probably couldnt do much better.
Don't take this the wrong way, as I'm sure the shop you work at is full of great people who are cool to be around. Springs should be pretty easy with the correct tool and know-how. Every time you post something like this I sort of get angry at the "professionals" at your shop who should be teaching you the right way to do things. Are they just standing back and laughing at you, or are they going "yeah, we don't like springs either. Usually we just put the whole thing in the tank and press the button, then take it out after a minute". Either way, they aren't doing you any favors.
You seem really motivated with instrument repair and mods. I think you could find a better spot to get mentored, and maybe do a summer apprenticeship or something.[/quote]
The tech that used to teach me is still recovering from surgery so i dont really have anyone to learn from except 2 woodwind guys that arent too cool. My desk is in a different room from everyone else and all the equipment so no one really sees what i do unless i bring it in there and ask for help, but they probably couldnt do much better.
- stewbones43
- Posts: 333
- Joined: Oct 25, 2018
Check out Ferree's Tools catalogue!
Item D49 is a "Waterkey spring installation jig" and is a horseshoe shaped narrow bore tube which fits over the end of the 2 pointy ends of the waterkey spring and allows you to fit it without any need for a blood transfusion afterwards. It can also be used for a single pointy bit. I recently replaced a Conn 88H trigger spring using it; very easy and no harm to life or limb.
The only problem is cost................................................................................$6.05!!!!!!!!!! :good:
Cheers
Stewbones
Item D49 is a "Waterkey spring installation jig" and is a horseshoe shaped narrow bore tube which fits over the end of the 2 pointy ends of the waterkey spring and allows you to fit it without any need for a blood transfusion afterwards. It can also be used for a single pointy bit. I recently replaced a Conn 88H trigger spring using it; very easy and no harm to life or limb.
The only problem is cost................................................................................$6.05!!!!!!!!!! :good:
Cheers
Stewbones
- Doug_Elliott
- Posts: 4155
- Joined: Mar 22, 2018
Make your own out of that copper tubing I mentioned.
- timothy42b
- Posts: 1812
- Joined: Mar 27, 2018
[quote="Doug Elliott"]Make your own out of that copper tubing I mentioned.[/quote]
And then keep it secure in your locker, or the others will "borrow" it.
And then keep it secure in your locker, or the others will "borrow" it.
- Doug_Elliott
- Posts: 4155
- Joined: Mar 22, 2018
Buy 1 ft of tubing, make 3 of them.
- Crazy4Tbone86
- Posts: 1654
- Joined: Jan 14, 2020
Here is the infamous tool mentioned above. This is one from either Allied or Ferree's. I always keep several of them around (one's that I have bought and home-made models) and I try to keep one in my case to help out people at gigs. They are usually sold with one end a bit longer than the other, which some people prefer. I always trim mine so that both ends are the same length....that's just my preference.
Another trick is to use the saddle as the spring holding device. You press the spring up against the saddle in its least-tension position and then rotate it in to position for the hinge screw. It's a skill you develop after you get tired of chewing up your fingers. Stabbing your fingers with a sharp spring is a right of passage for becoming a tech......oh to be young again!
<LINK_TEXT text="https://trombonechat.com/download/file. ... 6b9ffb5063">https://trombonechat.com/download/file.php?mode=view&id=6833&sid=3c77f06302e7ac7a472ddb6b9ffb5063</LINK_TEXT> be young again!
Another trick is to use the saddle as the spring holding device. You press the spring up against the saddle in its least-tension position and then rotate it in to position for the hinge screw. It's a skill you develop after you get tired of chewing up your fingers. Stabbing your fingers with a sharp spring is a right of passage for becoming a tech......oh to be young again!
<LINK_TEXT text="https://trombonechat.com/download/file. ... 6b9ffb5063">https://trombonechat.com/download/file.php?mode=view&id=6833&sid=3c77f06302e7ac7a472ddb6b9ffb5063</LINK_TEXT> be young again!
- WGWTR180
- Posts: 2152
- Joined: Sep 04, 2019
[quote="Elow"]So, i took apart a newish bach 42 for a ultrasonic cleaning and i took apart the rotor and everything and i don’t know if the trigger is safe for our chemicals so i took it off. I thought no biggie. I have been trying for 30 minutes to put the stupid trigger back on. My fingers have so many cuts and my thumb is numb. This can’t be the right way. The main problem i’m having is the spring coming and stabbing it’s way into my lovely thumb. Please someone help me[/quote]
Don't you work in a repair shop??? Shouldn't you know how to do this?
Don't you work in a repair shop??? Shouldn't you know how to do this?
- Elow
- Posts: 1924
- Joined: Mar 02, 2020
[quote="WGWTR180"]
Don't you work in a repair shop??? Shouldn't you know how to do this?[/quote]
Yup, i’m learning stuff as i go. The tech who usually teaches me stuff had some wrist surgery so he’s out for a bit.
Don't you work in a repair shop??? Shouldn't you know how to do this?[/quote]
Yup, i’m learning stuff as i go. The tech who usually teaches me stuff had some wrist surgery so he’s out for a bit.
- WGWTR180
- Posts: 2152
- Joined: Sep 04, 2019
[quote="Elow"]<QUOTE author="WGWTR180" post_id="128307" time="1603280244" user_id="7573">
Don't you work in a repair shop??? Shouldn't you know how to do this?[/quote]
Yup, i’m learning stuff as i go. The tech who usually teaches me stuff had some wrist surgery so he’s out for a bit.
</QUOTE>
Well you seem to be an authority on so many other things. :roll:
Don't you work in a repair shop??? Shouldn't you know how to do this?[/quote]
Yup, i’m learning stuff as i go. The tech who usually teaches me stuff had some wrist surgery so he’s out for a bit.
</QUOTE>
Well you seem to be an authority on so many other things. :roll: