Valves large shank
- yhc
- Posts: 31
- Joined: Dec 06, 2019
Hello everyone.
That somebody know there are piston trombones with large shank. if there is, how they can be achieved. The ones I have searched for are small shank.
Thanks for your answers.
Cheers!!!
That somebody know there are piston trombones with large shank. if there is, how they can be achieved. The ones I have searched for are small shank.
Thanks for your answers.
Cheers!!!
- BGuttman
- Posts: 7368
- Joined: Mar 22, 2018
The only instrument I know of in the US isn't really a trombone: the Conn 90G (no longer made). It's large bore, and shaped like a baritone horn.
In Europe you may find large bore "cavalry" trombones with rotary valves. Never seen any with pistons.
I hope somebody has better information
In Europe you may find large bore "cavalry" trombones with rotary valves. Never seen any with pistons.
I hope somebody has better information
- modelerdc
- Posts: 352
- Joined: May 03, 2018
A one time Tommy Johnson had a valve section made for his conn 62H bass bone. so you had 5 valves, three like any valve trombone and the two on the bell. You could adapt the valves from a old .562 bore baritone and make one!
- Burgerbob
- Posts: 6327
- Joined: Apr 23, 2018
Noah Gladstone has had one large bore valve trombone made, specifically because there are no options like that on the market (and never really have been).
- JohnL
- Posts: 2529
- Joined: Mar 23, 2018
I don't think there was ever anything like that as a production item. The aforementioned Conn 90G is probably the closest.
If you have access to a tech with serious mad scientist tendencies, they can probably piece together something out of baritone parts and a trombone bell section. DEG Music Products used to sell something they called a "jazzbone"; basically a marching baritone valve section (including the leadpipe) coupled with a trombone bell. Those were small shank, though, and did not have very many fans. There's a pic of one on this page:
<LINK_TEXT text="https://sites.google.com/site/beecherbo ... bone---p-2">https://sites.google.com/site/beecherbob/music/variations-on-the-trombone---p-2</LINK_TEXT>
If you have access to a tech with serious mad scientist tendencies, they can probably piece together something out of baritone parts and a trombone bell section. DEG Music Products used to sell something they called a "jazzbone"; basically a marching baritone valve section (including the leadpipe) coupled with a trombone bell. Those were small shank, though, and did not have very many fans. There's a pic of one on this page:
<LINK_TEXT text="https://sites.google.com/site/beecherbo ... bone---p-2">https://sites.google.com/site/beecherbob/music/variations-on-the-trombone---p-2</LINK_TEXT>
- whitbey
- Posts: 654
- Joined: Mar 23, 2018
I found playing euph that rotaries play more like a slide then pistons. Trumpet players that play rotaries say similar things.
That being said, a Cerveny euphonium or something East Euro could be a donor valve section. And if you like pistons, there are lots of euphs out there.
That being said, a Cerveny euphonium or something East Euro could be a donor valve section. And if you like pistons, there are lots of euphs out there.